Current Reissue Mexican Border Service Ribbon bar

Size is 1 1/2 x 3/8 inches, ribbon bar comes with standard US double clutch back single place mounting bar.

Listing is for one, photos show front and back.

Thanks for shopping NCHSinc.

Store Use Only:

Rack 15, Rib082

Reproduction WW 1 Canadian YMCA War Services patch.

Machine embroidered on cotton, WW 2 style machines, cut edge.

Size is 3 1/2 x 4 inches.

Listing is for 1, stock photos front and back.

Reproduction of the Bronze First Model Large Size Oak Leaf Device.

Used on US medals to denote additional awards.

Used in the 1930s and WW2 era until replaced by the normal size that is still in use today.

Complete with double back attachment.

This listing is for one (1) piece. photo shows front and back.

Device measures 3/4 x 1/2 inch.

Listing is for (1), photo shows front and back.

Thanks for shopping NCHSinc.

Store use only: Rack 14, shelf C

Reproduction WW 1 Imperial Russian (Czar) Cap badge or cockade.

Made of silver color metal with enamel orange and black finish.

Size is 1 1/8 x 1 5/8 inches, with prongs to attach to hat.

Listing is for 1, stock photos show front and back.

Reproduction WW 1 era.

British shoulder tabs, Royal Flying Corps RFC.

Machine embroidered on wool.

Size is 5 1/2 x 1 7/8 inches.

Listing is for a pair, stock photos show front and back.

Reproduction WW 1 era.

British shoulder tabs, Royal Flying Corps RFC.

Machine embroidered on wool.

Size is 4 1/2 x 1 1/2 inches.

Listing is for a pair, stock photos show front and back.

REPRODUCTION WWI cap badge for enlisted personnel of the Royal Flying Corps.

Stamped bronze color metal (no pins are included).

Size is 1 1/2 x 1 7/8 inches.

Listing for one, stock photos show front and back.

Reproduction WW 1 era.

Royal Flying Corps RFC, Pilot wing

Hand embroidered on wool.

Size is 5 x 1 3/4 inches.

Listing is for 1, stock photos show front and back.

Reproduction WWI World War 1 French Helmet plate for the Adrian helmet.

Intendance or commissary (supply) branch.

Stamped metal construction, with 2 prong attachment on back to fasten to Adrian helmet.

Size is 2 3/4 x 2 3/4 inches.

Listing for one, stock photos show front and back.

Reproduction WWI/II French helmet plate worn by unnumbered Zouave and Tirailleur units on the Adrian helmet.

Stamped metal, 2 prongs back attachment.

Size is 2 3/16 x 2 1/16 inches.

Listing for one, stock photos show front and back

REPRODUCTION WWI - WWII French Artillery Helmet Plate for the French style Adrian Helmet.

Stamped metal, 2 backing prongs.

Size is 3 1/4 x 2 5/8 inches.

Listing for one, stock photos show front and back.

REPRODUCTION WW1 - WW2 Colonial Infantry helmet plate for the French style Adrian helmet.

Stamped metal construction, 2 backing prongs.

Size is 2 x 3 inches.

Listing for one, stock photos show front and back.

REPRODUCTION WWI - WWII Belgium helmet plate, French style Adrian helmet.

Stamped metal, 2 backing prongs.

Size is 2 1/4 x 2 1/2 inches.

Listing for one, stock photos show front and back

Used Old Stock. French chin strap for Adrian Helmets. Not sure of time period so calling them reproductions, even though they are original, again just not sure from when. Old surplus stock.

Leather is dry needs conditioning. I would say they are for display only not for use. Treat them gently.

Blah, Blah, Blah, I'm sure NO ONE will read this!!!

Fittings are French government contract made.

Listing for one, stock photos show front and back.

REPRODUCTION WWI/II French 11th Zouave helmet plate for the Adrian helmet.

Stamped metal, double prong back attachment. This plate has a primer coat and may have some light rust. It must be painted to match the color of the helmet.

Size is 1 7/8 x 2 1/8 inches.

Listing for one, stock photos show front and back.

REPRODUCTION WWI/II French 9th Tirailleurs helmet plate, Adrian helmet.

Stamped metal, double prong back attachment.

Size is 2 inches round.

Listing for one, stock photos show front and back.

REPRODUCTION WWI French 3rd Zouaves helmet plate for the Adrian helmet.

Stamped metal, double prong back attachment. This plate has a primer coat and may have some light rust. It must be painted to match the color of the helmet.

Size is 1 7/8 x 2 1/8 inches.

Listing for one, stock photos show front and back.

REPRODUCTION WWI/II French 7th Zouaves helmet plate for the Adrian helmet.

Stamped metal, double prong back attachment. This plate has a primer coat and may have some light rust. It must be painted to match the color of the helmet.

Size is 1 7/8 x 2 1/8 inches.

Listing for one, stock photos show front and back

REPRODUCTION WWI/II French Colonial forces helmet plate (Truppe de Marine) for the Adrian helmet.

This particular style was also used by the French Navy.

Stamped metal, double prong back attachment. This plate has a primer coat and may have some light rust. It must be painted to match the color of the helmet.

Size is 2 1/2 x 1 3/4 inches.

Listing for one, stock photos show front and back

REPRODUCTION WWI French Spahis Moroccan helmet plate, Adrian helmet.

Stamped brass metal, double prong back attachment.

Size is 2 3/16 inches round.

Listing for one, stock photos show front and back

REPRODUCTION WWI French Medical helmet plate (Infirmiers) for the Adrian helmet.

Stamped metal, double prong back attachment. This plate has a primer coat and may have some light rust. It must be painted to match the color of the helmet.

Size is 2 3/4 x 3 1/4 inches.

Listing for one, stock photos show front and back

REPRODUCTION WWI Imperial Russian helmet plate, French style Adrian helmet.

Stamped metal construction, 2 backing prongs.

Size is 2 1/2 x 3 1/8 inches.

Listing for one, stock photos show front and back

REPRODUCTION WW 1 Thai Siam Helmet Plate, Adrian helmet.

Stamped metal construction, 2 backing prongs.

Size is 2 1/2 x 3 inches.

Listing for one, stock photos show front and back.

Reproduction WW 1 Lafayette Escadrille badge.

Worn by US Pilots who were fighting for the French.

Size is 1 3/8 x 1 3/4 inches.

Stamped gold colored metal with pin back.

Listing for one, stock photos show front and back.

Reproduction WW 1 thru 1920's French Air Force badge.

Worn on Kepi's and overseas caps.

Stamped gold colored metal with pins on back for attachment .

Size is 1 3/4 x 1/2 inches.

Listing is for one (1) photo shows front and back

REPRODUCTION Post WWI French Tank Corps plate French style Adrian helmet.

Stamped metal, 2 backing prongs.

Size is 2 x 2 inches.

Listing for one, stock photos show front and back.

REPRODUCTION WW 1 Siam, Thai, French style Adrian helmet.

Stamped metal construction, 2 backing prongs.

Size is 2 1/2 x 3 1/16 inches.

Listing for one, stock photos show front and back.

REPRODUCTION WWI - WWII Polish helmet plate, French style Adrian helmet.

Yeager Light Infantry

Stamped metal, 2 backing prongs.

Size is 2 3/4 x 1 5/8 inches.

Listing for one, stock photos show front and back.